H41 - LÉZER PIV RENDSZER -ÁRAMLÁSMÉRÉSHEZ ÉS VIZUALIZÁCIÓHOZ

Cikkszám: H41

Letölthető anyagok:

Termékleírás:

RENDELÉSI SPECIFIKÁCIÓK

• PIV rendszer, amely tartalmaz lézert, kamerát és szoftvert.
• 200 mW (3b osztályú) 660 nm lézer, állítható impulzus szélességgel és távolsággal.
• 45° standard optika, 22° opcionális
• Az áramlási sebesség vektorok valós idejû 2D kijelzése frissítve 16Hz-ig.
• Az adatok rögzíthetõk video (avi), bitmap (bpm), szöveg (csv) és Matlab (mat) formátumban.

A termék részletes technikai, mûszaki adatait lásd lent, illetve a letölthetõ pdf. tartalmazza. Amennyiben részletesebb magyar nyelvû leírásra van szüksége, kérjük jelezze.

SPECIFICATION

Laser:

> Solid-state air-cooled 200 mW, 660 nm laser diode (Class 3b).

> Standard optics produce a c. 3 mm thick, 45° light sheet

(c. 200 mm wide at 250 mm).

> Interchangeable 22° light sheet optic available (item H41-3).

> Pulse separation (?t) of between 100 µs - 5 s (in steps of 10 µs).

> Pulse width of between 10 µs - 32 ms (in steps of 10 µs).

Camera:

> Super-sensitive VGA CMOS sensor:

640 * 480, 6.0 µm pixels (1/3" format);

~50% quantum efficiency at 660 nm;

75 - 110 dB dynamic range;

4.8 V/lux·sec sensitivity.

> Trigger input enables image pair acquisition to be synchronised with external events.

> Accepts standard CS- or C-mount lenses (12.5mm f/1.4 lens supplied).

> Camera exposure can be linked to the lasers pulsing, thereby enabling operation in a lit room.

Software Processing:

> Data refresh and recording rate up to 16Hz (dependent on the computer speed, the selected acquisition and PIV analysis parameters and the recording taking place)

> Real-time, or offline, 2-component vector calculation.

> Single pass or adaptive multi-pass cross-correlation with 8, 12, 16, 24, 32 or 64 pixel window sizes.

> 0% or 50% window overlap (i.e. maps of up to 19,000 vectors).

> Optional vector interpolation and filtering based on:

User-supplied velocity limits;

RMS of neighbouring vectors values.

> Calculation of the following derived scalars:

Vector angle and magnitude;

Vorticity and swirl;

Time-averaged mean velocity;

RMS and turbulence intensity.

Where applicable, vector component and statistical sample number are user-defined.

ORDERING CODES

H41-1 Laser PIV System for Flow measurement and Visualisation

H41-2 Laser PIV System for Flow measurement and Visualisation with submersible nanoLase light sheet projector

VOLTAGE VARIANTS

H41-1-A, H41-2-A 220-240V, 50Hz

H41-1-B, H41-2-B 115V, 60Hz

DESCRIPTION

The H41 consists of two main assemblies: the nanoLase light sheet projector and the rtCam camera, with built-in timing synchroniser. The rtCam interfaces to the rtControl software package, which runs on a standard PC under Windows XP (not supplied by Armfield).

The nanoLase consists of a low-power solid-state laser, together with optics to form the beam into a ~3mm thick, 45° wide light sheet. The laser is modulated to produce pairs of pulses, with an adjustable delay (known as ?t) of between 100 ?s – 5 s. Both the pulse separation and pulse width can be set directly from the rtControl software.

The nanoLase and rtCam are arranged orthogonally around the flow to be measured, with the laser being used to illuminate flow-following “seeding” particles that have been mixed into the water. The system is supplied with 100 g of 100 µm polyamide particles, which are suitable for the majority of water-based flows. These particles scatter light towards the rtCam, which acquires a pair of images every time the laser emits a pulse pair.

Each pair of particle images are immediately sent to the control PC using a standard FireWire (IEEE 1394) connection. The rtControl software then subdivides the images into "tiles" which are cross-correlated in order to measure the displacement of the seeding particles in that area. Because the delay between the images is known, a velocity map can be calculated for the whole of the cameras field of view. While most PIV systems take several minutes to get to this point, rtCam and rtControl can repeat the entire process up to 16 times a second.

In addition to the real-time velocity vector maps, rtControl can calculate and display derived statistical data (such as vorticity or time-averaged velocity) with options to superimpose vectors, scalars, and video on top of each other. Similarly, there are options to record data as either raw images (in BMP format), or as processed vectors or scalars (in AVI movie, CSV spreadsheet, or Matlab® archive format). Previously recorded datasets can be loaded into rtControl for subsequent display and analysis

Both the rtCam and the nanoLase are fitted with standard mountings suitable for a selection of different mounting mechanisms. The system is supplied with two small desktop tripods; larger tripods and various snake-arm mounts are available as accessories. Also available are purpose designed mounts designed for use with Armfield flow channels.

The system is provided complete with all cables and packed into an Aluminium flight case for safe storage and easy transport.

OPTIONAL ACCESSORIES

H41-3 22° Light sheet Optics for nanoLase.

The standard 45° light sheet optics can be replaced with item H41-3 in order to produce a narrower 22° fan angle. This can be useful in cases where the nanoLase needs to be placed further away from the measurement area.

H41-5 1.5 m tripod for rtCam

H41-6 Snakearm with magnetic base for nanoLase

H41-7 Snakearm with G-Clamp base for nanoLase

H41-10 Mounting system for Armfield C4-MkII flume

(requires H41-2 submersible nanoLase and H41-3 optics option)

H41-11 Mounting system for Armfield S6-MkII flume

(requires H41-2 submersible nanoLase and H41-3 optics option)

CONSUMABLES

H41-4 Seeding particles, suitable for water flows (200g)

ESSENTIAL REQUIREMENTS

Electricity supply:

H41-1-A, H41-2-A 220-240V, 50Hz

H41-1-B, H41-2-B 115V, 60Hz

Personal Computer (PC) running Windows XP, with IEEE1394 (A or B) interface.

It is recommended that the PC has at least 2GB RAM with a processing speed of at least 2GHz. The display resolution should be at least 1024 * 768, true colour.

The data refresh rate achievable is dependent on the specification of this computer. For example, to achieve 16Hz data refresh and recording rate, a 2.66GHz Intel dual core processor or better is required, and the hard drive must support sustained writes at 9.5 Mb/s.

SHIPPING SPECIFICATION

Volume: 0.1m³

Gross weight: 6kg

OVERALL DIMENSIONS

nanoLase

Length: 0.050m

Width: 0.050m

Height: 0.085m

Submersible nanoLase

Length: 0.050m

Width: 0.050m

Height: 0.095m

rtCam

Length: 0.050m

Width: 0.050m

Height: 0.090m